YOUR STORE FOR LOAD CELLS, SCALE, WEIGHT INDICATORS.
TEDEA 1040 Single-Point Load Cell 5 kg to 100 kg
- Description
- Additional Information
Tedea 1040 Low Capacity Single-Point Aluminum Load Cell
The Tedea 1040 are low profile single-point load cells designed for direct mounting of low cost weighing platforms.Their small physical size, combined with high accuracy and low cost, makes these load cells ideally suited for retail, bench and counting scales.
Available in anodized aluminum these high accuracy load cells are approved to NTEP and other stringent approval standards, including OIML R60. For hazardous environments this load cell has EEx ia IIC T4 level of approved option.
An optional special humidity resistant protective coating assures long-term stability over the entire compensated temperature range.The two additional sense wires feed back the voltage reaching the Single-Point load cell 1040.
Complete compensation of changes in lead resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics.
Tedea 1040 Optional
- FM approval available
- IP67 available
Load Cell Tedea 1040 Applications
- Bench scales
- Counting scales
- Grocery scales
- FM approval available
Approval ATEX, FM, NTEP, OIML Signal Analog Protection class IP67 Material Aluminum Internal Battery -- Maximum excitation 15 VDC or VAC RMS Maximum safe overload 150 % of R.C. Max platform size - Operating temp range -20 to +70 C Recommended excitation 10 VDC or VAC RMS Recommended torque Up to 30 kg: 7.0 Nm; 50 kg and up: 10 Nm Sensitivity 2.0 mV/V Storage temp range - Manufacturer Vishay-Tedea Cable type 6 wire, PVC, single floating screen Cable length 1040:1.0 m, 1041:0.5 m
