The Tedea 1260 is a high performance, high capacity single-point load cell designed for direct mounting of large platforms. The rugged construction offers high immunity to side forces making it suitable for a wide range of weighing applications, including bench scales and check weighing.
A special humidity resistant protective coating assures long-term stability over the entire compensated temperature range. For hazardous environments this load cell has an EEx ia IIC T4 level of approval.
The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into appropriate electronics.
Tedea 1260 Load Cell PDF Data Sheet
Tedea 1260 OPTIONAL
Tedea 1260 APPLICATIONS
Approval | ATEX, FM, NTEP, OIML |
---|---|
Signal | Analog |
Protection class | IP66 |
Material | Aluminum |
Internal Battery | -- |
Maximum excitation | 15 VDC or VAC RMS |
Maximum safe overload | - |
Max platform size | - |
Operating temp range | -20 to +70 C |
Recommended excitation | 10 VDC or VAC RMS |
Recommended torque | 16 Nm |
Sensitivity | 2.0 mV/V |
Storage temp range | - |
Manufacturer | Vishay-Tedea |
Cable type | Polyurethane jacket |
Cable length | 10 ft/3 m |
Interchangeable | HBM PW16, Rice Lake RL1260, Rice Lake RLPWM16, Coti CG-50-1, Tedea 1260S, Toledo MT1260 |