The Model Tedea 1250 is a single-point load cell designed for direct mounting of large platforms. The product is a cost-effective load cell for use on counting, weighing, bench or floor scale products.
This high-accuracy load cell is approved to OIML R60, NTEP, and other stringent approval standards. Suitable for use in hazardous environments, these load cells can be provided with European approval to EEx ia IIC T4 and are FM approved to class I, II, III, and Division I.
A special humidity-resistant protective coating assures long-term stability over the entire compensated temperature range. The two additional sense wires, sample the bridge supply voltage at the load cell. Complete compensation of change in the lead wires resistance, due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics.
Tedea 1250 Load Cell PDF Data Sheet
OPTIONAL
APPLICATIONS
Approval | ATEX, FM, NTEP, OIML |
---|---|
Signal | Analog |
Protection class | IP65 |
Material | Aluminum |
Internal Battery | -- |
Maximum excitation | 15 VDC or VAC RMS |
Maximum safe overload | 150 % of R.C. |
Max platform size | - |
Operating temp range | -20 to +70 C |
Recommended excitation | 10 VDC or VAC RMS |
Recommended torque | Up to 1000 kg: 16.0 1500 kg: 32.0 Nm |
Sensitivity | 2.0 mV/V |
Storage temp range | - |
Manufacturer | Vishay-Tedea |
Cable type | 6-wire braided, Polyurethane, floating screen |
Cable length | 3.0 m |
Interchangeable | Sensortronics 60001, Artech 60410, CAS BCM, HBM PW12, Revere 652, Rice Lake RLPWM12, Coti CG-50 |