YOUR STORE FOR LOAD CELLS, SCALE, WEIGHT INDICATORS.
STC-3Klb S-Type Load CellCeltron STC-3Klb 00STC-003E-D5-00F S-Type Tension/Compression Load Cell
- Description
- Additional Information
- 01 / 06S-type tension/compression load cells
S-type tension/compression load cells for confirmed-fit replacement and scale builds.
The Celtron STC-3Klb 00STC-003E-D5-00F S-Type Tension/Compression Load Cell is an S-type tension/compression load cell rated 3K lb. Use it as a replacement or new-build component only after confirming capacity, dimensions, material, seal rating, electrical signal, and wiring against the scale assembly. The catalog identifies the manufacturer as Vishay-Celtron and the model / part number as 00STC-003E-D5-00F.
3K lbRated capacityAluminium or nickel-plated alloy steelMaterialIP67ProtectionAnalogSignal02 / 06Application fitWhere this load cell belongs.
S-type cells are used for suspended, tension, and inline force applications where the force path must stay centered.
01Hanging scales
S-type geometry fits suspended weighing with clevises, rod ends, or tension hardware.
tension02Force measurement
Useful where the system measures pull, compression, or bidirectional force.
force03Retrofit work
Match thread, capacity, material, and wiring before swapping an existing S-beam.
replacement03 / 06Mechanical and electrical fitConfirm the details before replacement.
CAPACITYCapacity and load path
Confirm 3K lb against dead load, live load, impact, and load distribution.
MECHANICALMechanical fit
Check mounting pattern, installed height, load point, cable exit, and platform or vessel geometry before ordering.
ENVIRONMENTEnvironment
Catalog protection is IP67. Verify washdown, outdoor, corrosive, or hazardous exposure before replacement.
ELECTRICALElectrical match
Catalog signal is Analog. Confirm excitation, mV/V output, impedance, wiring color code, and indicator/transmitter input.
04 / 06Installation notesA load cell is only correct when the assembly around it is correct.
The safest way to quote or replace a load cell is to verify the installed geometry and the electrical interface together. Capacity alone is not enough.
- Match mounting holes, load point, thread, and installed height
- Confirm cell count and junction-box wiring
- Confirm material and protection rating for the environment
- Confirm rated output, excitation, and input/output impedance
- Keep datasheets, photos, and old part numbers with the service record
05 / 06Technical dataCatalog attributes for this load cell.
Material Aluminium or nickel-plated alloy steel Protection IP67 Signal Analog Cable length 19.7 ft / 6 m Manufacturer Vishay-Celtron Manufacturer part number 00STC-003E-D5-00F Rated capacity 3K lb Capacity 3000 lb Capacity in pounds 3,000 lb Sealing Covered and Potted Approval OIML R60 · NTEP Class III & IIIL Thread Unified National Rated output 2.0 mV/V (aluminium) / 3.0 mV/V (steel) Recommended excitation 10 VDC / VAC RMS Maximum excitation 15 VDC / VAC RMS Input impedance 410 ± 5 Ω (aluminium) / 385 ± 5 Ω (steel) Output impedance 350 ± 3 Ω Non-repeatability ≤ ±0.020 %RO Creep error ≤ ±0.030 %RO / 20 min Safe overload 150 %RC Ultimate overload 200 %RC (aluminium) / 300 %RC (steel) Operating temperature −20 to +60 °C Output sensitivity 2.0 mV/V (aluminium) / 3.0 mV/V (steel) Non-linearity ≤ ±0.020 %RO Hysteresis ≤ ±0.020 %RO Zero balance ± 1 %RO Compensated temperature −10 to +40 °C 06 / 06Part number referenceOrder code and fit FAQ.
Product Order code Celtron STC-3Klb 00STC-003E-D5-00F S-Type Tension/Compression Load Cell 12120 Is the SKU enough to confirm replacement?
No. Use the SKU as the order code, then confirm model, capacity, dimensions, wiring, signal, and environment.
What if some catalog attributes are blank?
Treat blank attributes as items to confirm before ordering. The description only uses available catalog data and conservative application guidance.
Can WeightechUSA help identify a match?
Yes. Send photos of the installed cell, the label, mounting dimensions, cable colors, capacity, and the scale application.
DIMENSIONSOutline dimensions.
Source: manufacturer datasheet Talk to a WeightechUSA load-cell specialist.
Send the old load-cell label, capacity, dimensions, cable details, and application. We will confirm whether 12120 is the right fit.
Email SalesView DatasheetCall +1 (954) 666-0877 × 305 Signal Analog Protection class IP67 Material Nickel-Plated Alloy Steel Compensated temp range −10 to +40 °C Creep error 20mins ≤ ±0.030 %RO / 20 min Hysteresis error ≤ ±0.020 %RO Input impedance 410 ± 5 Ω (aluminium) / 385 ± 5 Ω (steel) Internal Battery -- Maximum excitation 15 VDC / VAC RMS Maximum safe overload 150 %RC Non-repeatability ≤ ±0.020 %RO Operating temp range −20 to +60 °C Output impedance 350 ± 3 Ω Rated capacity 3K lb Rated output 2.0 mV/V (aluminium) / 3.0 mV/V (steel) Recommended excitation 10 VDC / VAC RMS Ultimate central overload 200 %RC (aluminium) / 300 %RC (steel) Zero balance ± 1 %RO Manufacturer Vishay-Celtron Capacity 3000 lb Cable length 19.7 ft / 6 m Thread - Clevis Unified National Sealing Covered and Potted Manufacturer's Part Number 00STC-003E-D5-00F Approval NTEP Short name STC-3Klb S-Type Load Cell Hero chips 3,000 lb; IP67; Nickel-Plated Alloy Steel; Analog signal; NTEP
