TMR / feed-mixer weighing
Mobile weigh bars under the mixer frame plus a DG400 at the cab — load-by-load ration accuracy with feed-out logging by pen.
- CellsDG mixer-feed mobile bars
- IndicatorDinamica Generale DG400
- SealingIP68
Weighing for the field & feedlot
Weighing built for
the field & feedlot.
Feed-mixer weigh bars, in-field feeding monitors, grain & silo load cells, and drop-in retrofits for Avery Weigh-Tronix and Digi-Star — specified for farmers, equipment OEMs, and retrofit shops. IP68 sealed, analog, interchangeable. Shipped from Davie, FL stock.
01
Setup · 01
TMR / Feed-Mixer Weighing
Mobile weigh bars under the mixer frame turn any TMR or vertical feed mixer into a load-by-load ration scale — sealed, shock-tolerant, and read at the operator station.
DG 969-0492 · 969-0493 · 969-0217 · DG400 View mixer weigh bars 02 Setup · 02Mobile & Axle Weigh Bars
Weigh bars sized to the running gear of grain carts, feed wagons, and trailers — tapered-bore and axle styles to match your spindle, so the cart weighs itself in the field.
DG 969-0219 · 969-0547 · 969-0248 · 969-0545 View weigh bars 03 Setup · 03Grain & Silo Storage Weighing
Compression load cells under grain bins, feed silos, and tanks — continuous level-by-weight that doesn't care about bridging, density, or angle of repose like a radar level sensor does.
DG 969-0566 50K · Berman SIPX · Zemic View compression cells 04 Setup · 04In-Field Feeding Monitor
The DG400 reads the mixer at the cab and logs every load — ration targets, accumulation, and feed-out by pen, so the right mix lands in front of the right group.
Dinamica Generale DG400 View DG400 monitor 05 Retrofit · Drop-in Setup · 05 — Retrofit readyIndicators & Drop-in Retrofit
Dinamica Generale weigh bars interchange with Avery Weigh-Tronix and Digi-Star — same mounting envelope, same analog output. Swap a failed bar or a whole scale head without re-engineering the mixer.
DG400 · WT-series · Avery / Digi-Star compatible View indicatorsWhere it fits on the farm.
Five weighing points across a feeding and grain operation — from grain receiving through silo storage, ration mixing, and feed-out. The same sealed cells and indicators carry across all of them.
- 01Grain receiving — weigh-in at intake on a platform or axle scale; first inventory entry for incoming grain and ingredients.
- 02Feed / grain silo — compression load cells under bins and silos for continuous level-by-weight independent of bridging or density.
- 03TMR feed mixer — mobile weigh bars under the mixer frame; the DG400 sequences each ingredient against the ration with accumulation.
- 04Fertilizer / bagging — gravimetric fill control for bagged feed, seed, and fertilizer blends with coarse/fine cutoff.
- 05Feed-out & monitor — the DG400 reads the mixer at the cab, logs feed-out by pen, and exports the feeding record.
Feeding & ration control
6 Capabilities
Feed the ration, not a guess.
Programmed rations, ingredient-by-ingredient sequencing, automatic accumulation, load logging, and feed-out tracking by pen — the DG400 runs the feeding routine so the operator just follows the prompt.
-
A
Recipe
Programmed rations
Store rations by name with target weights per ingredient. The operator selects the ration and the DG400 prompts each load in sequence.
Multi-ration storage -
B
Accuracy
Ingredient sequencing
Each ingredient is weighed against its target with a tolerance window — over- and under-load are flagged on the display before the next load.
Per-ingredient tolerance -
C
Preparation
Automatic tare
The mixer tares to zero between loads so each ingredient reads net — no mental math, no carry-over from the last ration.
Per-load automatic -
D
Records
Load & feed-out logging
Every mixed load and every feed-out drop is logged — by ration, by pen, by day — for shrink control and a defensible feeding record.
Exportable log -
E
Accumulation
Run-to-target totals
Accumulating mode totals partial loads toward a ration target — top up a hard-to-meter ingredient and the display counts down to zero.
Add / count-down modes -
F
Environment
Sealed for the yard
IP68 cells and rugged cab indicators take dust, washdown, vibration, and weather — built for the loader cab and the open feed alley, not a clean panel.
IP68 cells · rugged display
Built for the yard.
Three places the operation weighs every day. The same sealed cells and indicator family run all three — so the parts shelf stays short and the operator learns one screen.
-
A In the mixer -
B Under the bin Grain & silo inventory
Compression cells turn a grain bin or feed silo into a live inventory scale — level-by-weight that ignores bridging, density, and angle of repose.
- CellDG 969-0566 50K · Berman
- Capacityto 29,855 kg / cell
- SignalAnalog mV/V
-
C On the running gear Mobile & axle weigh bars
Tapered-bore and axle weigh bars matched to grain-cart and feed-wagon spindles — the cart weighs itself in the field, no platform scale needed.
- BarsDG 969-0219 / 0547 axle
- Bore2.125″–3.125″ matched
- ClassIP68 · shock-tolerant
Built to take it
Sealed, sized, and trade-ready.
-
IP68
Dinamica Generale weigh bars and cells are sealed against dust, washdown, and standing water — rated for open-yard and feed-alley service.
-
IP69K
WT-series stainless indicators withstand high-pressure, high-temperature washdown for sanitary feed and wet handling areas.
-
NTEP CC
Certificate of Conformance path available where grain or feed weighments are bought and sold legal-for-trade.
-
NIST HB-44
US legal-for-trade scale code — the framework we build to when a weighment leaves the farm for sale.
For farmers, OEMs & retrofit shops
Tell us the mixer or the make.
Tell us the mixer or the make.
We'll match the bars and the head.
Send the mixer model, the weigh-bar part number you're replacing, or a photo of the running gear. We come back with the interchangeable Dinamica Generale bars, the indicator, and the harness — usually within one business day.
How a project goes.
From a weigh-bar part number or a mixer make to a working scale on the gear. Four discrete steps so nothing gets dropped between the call and the field.
-
01
Discovery
Make, model & what you're replacing.
You share the mixer or cart make, the weigh bars or scale head you run today, and the environment. We confirm spindle bore, capacity, and whether it's a retrofit or a fresh build.
< 1 business day -
02
Match & quote
Interchange list and BOM.
You get the matching Dinamica Generale bars (with the Avery Weigh-Tronix / Digi-Star cross-reference), the indicator, harness, and mounting — with lead time per line.
1–3 business days -
03
Supply
Stock pull & ship.
Common bars and DG400 heads ship same-day from Davie, FL. Long-tail spindle bores and custom harness run 1–3 weeks. We label and kit per your machine.
Same-day to 3 weeks -
04
Commission
Calibrate & sign off.
Phone or video support through install and calibration — bar mounting, span set with a known weight, ration programming, and a feed-out test before you run it for real.
On request
Manufacturers we stock.
Brands chosen for ag and feed duty — the weigh bars, cells, indicators, and modules we keep on the shelf in Davie, FL and cross-reference against the legacy scale heads in the field.
- Dinamica GeneraleWeigh bars, cells & DG400
- Griffith ElderWeighbridges & on-board ag weighing
- LaumasIndicators & transmitters
- BermanSilo & bin compression modules
- ZemicBeam & canister cells
- WeightechUSAIn-house WT-series indicators
Buyer FAQ.
The questions that come up on every feed-mixer, grain-cart, and silo project — interchangeability, environment, sizing, monitoring, and lead times.
-
In most cases, yes. Dinamica Generale weigh bars match the common mounting envelopes and analog output used by Avery Weigh-Tronix and Digi-Star, so they bolt to the existing frame and read on a compatible head. Send the part number or a photo of the bar and spindle and we confirm the cross-reference before quoting.
-
Yes. The Dinamica Generale weigh bars and cells are IP68 sealed in coated nylon/glass-fiber housings for open-yard and feed-alley service, and our WT-series stainless indicators are IP69K for high-pressure washdown areas. These are built for the loader cab and the alley, not a clean control room.
-
Size the bars to the loaded weight of the machine, not the payload alone. The Dinamica Generale ag bars run roughly 7,930 to 29,855 kg capacity per bar depending on model, so a set is matched to the machine's gross weight with margin. Tell us the make, model, and number of support points and we spec the set.
-
That's exactly what the DG400 in-field feeding monitor is for. Store rations by name, sequence each ingredient against target with tolerance prompts, accumulate to a goal, and log every mixed load and feed-out drop — by ration, by pen, by day — for shrink control and a defensible feeding record.
-
Yes. Equipment manufacturers building weighing into mixers, carts, and trailers, and dealers servicing them, get tiered pricing and volume support. Send your business details and we route you to the OEM/dealer program.
-
Common weigh bars and DG400 heads ship same-day from Davie, FL stock. Less-common spindle bores, custom harness lengths, and compression-cell silo kits typically run 1 to 3 weeks. Exact dates are confirmed with the quote.
Talk to an engineer.
Retrofitting a feed mixer, sizing weigh bars for a grain cart, or building weighing into a machine you manufacture? Our application engineers spec ag and feed builds every week — pick up the phone or send the make and model.
