
Revere 363-15Klb 00363-015E-D3-00F S-Type Tension/Compression Load Cell
- Description
- Additional Information
- 01 / 06S-type tension/compression load cells
S-type tension/compression load cells for confirmed-fit replacement and scale builds.
The Revere 363-15Klb 00363-015E-D3-00F S-Type Tension/Compression Load Cell is an S-type tension/compression load cell rated 15K lb. Use it as a replacement or new-build component only after confirming capacity, dimensions, material, seal rating, electrical signal, and wiring against the scale assembly. The catalog identifies the manufacturer as Vishay-Revere and the model / part number as 00363-015E-D3-00F.
15K lbRated capacityNickel-plated alloy steelMaterialIP65ProtectionAnalogSignal02 / 06Application fitWhere this load cell belongs.
S-type cells are used for suspended, tension, and inline force applications where the force path must stay centered.
01Hanging scales
S-type geometry fits suspended weighing with clevises, rod ends, or tension hardware.
tension02Force measurement
Useful where the system measures pull, compression, or bidirectional force.
force03Retrofit work
Match thread, capacity, material, and wiring before swapping an existing S-beam.
replacement03 / 06Mechanical and electrical fitConfirm the details before replacement.
CAPACITYCapacity and load path
Confirm 15K lb against dead load, live load, impact, and load distribution.
MECHANICALMechanical fit
Check mounting pattern, installed height, load point, cable exit, and platform or vessel geometry before ordering.
ENVIRONMENTEnvironment
Catalog protection is IP65. Verify washdown, outdoor, corrosive, or hazardous exposure before replacement.
ELECTRICALElectrical match
Catalog signal is Analog. Confirm excitation, mV/V output, impedance, wiring color code, and indicator/transmitter input.
RETROFITInterchangeable note
Rice Lake RL20000
04 / 06Installation notesA load cell is only correct when the assembly around it is correct.
The safest way to quote or replace a load cell is to verify the installed geometry and the electrical interface together. Capacity alone is not enough.
- Match mounting holes, load point, thread, and installed height
- Confirm cell count and junction-box wiring
- Confirm material and protection rating for the environment
- Confirm rated output, excitation, and input/output impedance
- Keep datasheets, photos, and old part numbers with the service record
05 / 06Technical dataCatalog attributes for this load cell.
Material Nickel-plated alloy steel Protection IP65 Signal Analog Cable length 6m Cable type 6 wires Manufacturer Vishay-Revere Manufacturer part number 00363-015E-D3-00F Rated capacity 15K lb Capacity 15000 lb Capacity in pounds 15,000 lb Sealing Covered and Potted Approval Accuracy class D3 — NTEP Class III, 3,000 divisions Thread Unified National Rated output 3.3 ± 0.3 mV/V (3.0 mV/V trimmed) Recommended excitation 10 VDC / VAC RMS Maximum excitation 15 VDC / VAC RMS Input impedance 390 ± 15 Ω Output impedance 350 ± 3.5 Ω Insulation resistance ≥ 5000 MΩ Combined error ≤ ±0.0200 %FSO Non-repeatability ≤ ±0.0100 %FSO Safe overload 150 %Emax Ultimate overload 300 %Emax Operating temperature −40 to +80 °C Interchangeable note Rice Lake RL20000 Output sensitivity 3.3 ± 0.3 mV/V (3.0 mV/V trimmed) Zero balance ± 1.0 %FSO Compensated temperature −10 to +40 °C Storage temperature −40 to +90 °C Safe side load 100 %Emax 06 / 06Part number referenceOrder code and fit FAQ.
Product Order code Revere 363-15Klb 00363-015E-D3-00F S-Type Tension/Compression Load Cell 10757 Is the SKU enough to confirm replacement?
No. Use the SKU as the order code, then confirm model, capacity, dimensions, wiring, signal, and environment.
What if some catalog attributes are blank?
Treat blank attributes as items to confirm before ordering. The description only uses available catalog data and conservative application guidance.
Can WeightechUSA help identify a match?
Yes. Send photos of the installed cell, the label, mounting dimensions, cable colors, capacity, and the scale application.
DIMENSIONSOutline dimensions.

Source: manufacturer datasheet Talk to a WeightechUSA load-cell specialist.
Send the old load-cell label, capacity, dimensions, cable details, and application. We will confirm whether 10757 is the right fit.
Email SalesView DatasheetCall +1 (954) 666-0877 × 305 Signal Analog Protection class IP65 Material Nickel-Plated Alloy Steel Combined error ≤ ±0.0200 %FSO (D3) Compensated temp range −10 to +40 °C Creep error 20mins ≤ ±0.0030 % applied load (D3) Input impedance 390 ± 15 Ω Insulation resistance ≥ 5000 MΩ Internal Battery -- Maximum excitation 15 VDC / VAC RMS Maximum safe overload 150 %Emax Max platform size - Non-repeatability ≤ ±0.0100 %FSO NTEP/OIML NTEP Operating temp range −40 to +80 °C Output impedance 350 ± 3.5 Ω Rated capacity 15K lb Rated output 3.3 ± 0.3 mV/V (3.0 mV/V trimmed) Recommended excitation 10 VDC / VAC RMS Recommended torque - Safe sideload 100 %Emax Sensitivity 3.3±0.3 mV/V Storage temp range −40 to +90 °C Ultimate central overload 300 %Emax Zero balance ± 1.0 %FSO Manufacturer Vishay-Revere Capacity 15000 lb Cable type 6 wires Cable length 6m Thread - Clevis Unified National Sealing Covered and Potted Interchangeable Rice Lake RL20000, Coti CGSB-1, Artech 20210 Manufacturer's Part Number 00363-015E-D3-00F Approval NTEP Hero chips 15,000 lb; IP65; Nickel-Plated Alloy Steel; Analog signal; NTEP