
5102-100lb Shear Beam Load CellRevere 5102-100lb 05102-100L-3D-00X Shear Beam Load Cell
- Description
- Additional Information
- 01 / 06Shear beam and bending beam load cells
Shear beam and bending beam load cells for confirmed-fit replacement and scale builds.
The Revere 5102-100lb 05102-100L-3D-00X Shear Beam Load Cell is a shear beam or bending beam load cell rated 100 lb. Use it as a replacement or new-build component only after confirming capacity, dimensions, material, seal rating, electrical signal, and wiring against the scale assembly. The catalog identifies the manufacturer as Vishay-Revere and the model / part number as 05102-100L-3D-00X.
100 lbRated capacityHigh-alloy steel, nickel-platedMaterialIP67 (neoprene sleeve, environmentally sealed)ProtectionAnalogSignal02 / 06Application fitWhere this load cell belongs.
Shear and bending beam cells are common choices for floor scales, livestock platforms, tanks, hoppers, and low-to-mid capacity industrial scales.
01Platforms and floor scales
A practical load-cell family for fabricated platforms and summing-box systems.
platform02Tanks and hoppers
Works well when mounts control side load and vessel movement.
vessel03Livestock and agriculture
Often used in platform and chute builds when capacity and environmental rating fit.
ag scale03 / 06Mechanical and electrical fitConfirm the details before replacement.
CAPACITYCapacity and load path
Confirm 100 lb against dead load, live load, impact, and load distribution.
MECHANICALMechanical fit
Check mounting pattern, installed height, load point, cable exit, and platform or vessel geometry before ordering.
ENVIRONMENTEnvironment
Catalog protection is IP67 (neoprene sleeve, environmentally sealed). Verify washdown, outdoor, corrosive, or hazardous exposure before replacement.
ELECTRICALElectrical match
Catalog signal is Analog. Confirm excitation, mV/V output, impedance, wiring color code, and indicator/transmitter input.
04 / 06Installation notesA load cell is only correct when the assembly around it is correct.
The safest way to quote or replace a load cell is to verify the installed geometry and the electrical interface together. Capacity alone is not enough.
- Match mounting holes, load point, thread, and installed height
- Confirm cell count and junction-box wiring
- Confirm material and protection rating for the environment
- Confirm rated output, excitation, and input/output impedance
- Keep datasheets, photos, and old part numbers with the service record
05 / 06Technical dataCatalog attributes for this load cell.
Material High-alloy steel, nickel-plated Protection IP67 (neoprene sleeve, environmentally sealed) Signal Analog Manufacturer Vishay-Revere Manufacturer part number 05102-100L-3D-00X Rated capacity 100 lb Capacity 100 lb Capacity in pounds 100 lb Sealing Covered Thread Through Hole Rated output 2.0 mV/V Recommended excitation 5–10 VDC Maximum excitation 15 VDC Input impedance 350 ± 3.5 Ω Output impedance 350 ± 3.5 Ω Insulation resistance 5000 MΩ Combined error ≤ ±0.03 %FS Non-repeatability ≤ ±0.01 %FS Safe overload 150 %FS Operating temperature −18 to +65 °C Output sensitivity 2.0 mV/V 06 / 06Part number referenceOrder code and fit FAQ.
Product Order code Revere 5102-100lb 05102-100L-3D-00X Shear Beam Load Cell 12291 Is the SKU enough to confirm replacement?
No. Use the SKU as the order code, then confirm model, capacity, dimensions, wiring, signal, and environment.
What if some catalog attributes are blank?
Treat blank attributes as items to confirm before ordering. The description only uses available catalog data and conservative application guidance.
Can WeightechUSA help identify a match?
Yes. Send photos of the installed cell, the label, mounting dimensions, cable colors, capacity, and the scale application.
Talk to a WeightechUSA load-cell specialist.
Send the old load-cell label, capacity, dimensions, cable details, and application. We will confirm whether 12291 is the right fit.
Email SalesView DatasheetCall +1 (954) 666-0877 × 305 Signal Analog Protection class IP67 Material Nickel-Plated Alloy Steel Combined error ≤ ±0.03 %FS Input impedance 350 ± 3.5 Ω Insulation resistance 5000 MΩ Internal Battery -- Maximum excitation 15 VDC Maximum safe overload 150 %FS Non-repeatability ≤ ±0.01 %FS Operating temp range −18 to +65 °C Output impedance 350 ± 3.5 Ω Rated capacity 100 lb Rated output 2.0 mV/V Recommended excitation 5–10 VDC Manufacturer Vishay-Revere Capacity 100 lb Thread - Clevis Through Hole Sealing Covered Manufacturer's Part Number 05102-100L-3D-00X Short name 5102-100lb Shear Beam Load Cell Hero chips IP67; Nickel-Plated Alloy Steel; Analog signal