VPG 5330 5330-6150kg Shear Beam Load Cell
No · Load cell

VPG Shear Beam Load Cell · 5330-6150kg

SKU 10899
IP67; Coated; Analog signal
395.00
$395.00
  • 10899 - VPG 5330 Shear Beam Load Cell
  • Type: Shear beam and bending beam load cells
  • Material: Coated alloy steel
  • Protection: IP67
  • Signal: Analog
  • Manufacturer: VPG
  • Application: Mixer and feeder wagon load-cell replacement for agricultural equipment

Datasheet

OR
  • Description
  • Additional Information
  • 01 / 06Shear beam and bending beam load cells

    Shear beam and bending beam load cells for confirmed-fit replacement and scale builds.

    The VPG 5330 Shear Beam Load Cell is a shear beam or bending beam load cell. Use it as a replacement or new-build component only after confirming capacity, dimensions, material, seal rating, electrical signal, and wiring against the scale assembly. The catalog identifies the manufacturer as VPG and the model / part number as 10899. It is listed for mixer, feeder, and mobile agricultural equipment where the replacement must match the original bar or cell geometry and electrical output.

    Capacity
    Confirm from application
    Coated alloy steel
    Material
    IP67
    Protection
    Analog
    Signal
    02 / 06Application fit

    Where this load cell belongs.

    These load cells and weigh bars are intended for agricultural mixer and feeder wagons, grain carts, manure spreaders, forage wagons, seed tenders, and similar mobile equipment. Confirm the installed bar or compression cell by part number, diameter, length, connector, cable length, rated output, and whether the machine uses mobile or static loading values.

    01

    Mixer and feeder wagons

    Built for agricultural weighing where feed, forage, grain, manure, or mineral material is loaded, mixed, transported, or dispensed.

    agriculture
    02

    Mobile equipment replacement

    Match the old Dinamica, Digistar, Weigh-Tronix, or OEM part number plus the physical bar dimensions before ordering.

    replacement
    03

    Signal and connector

    Confirm mV/V output, mobile/static rating, cable length, connector type, and indicator compatibility before installation.

    wiring
    03 / 06Mechanical and electrical fit

    Confirm the details before replacement.

    CAPACITY

    Capacity and load path

    Confirm the rated capacity against dead load, live load, impact, and load distribution.

    MECHANICAL

    Mechanical fit

    Check mounting pattern, installed height, load point, cable exit, and platform or vessel geometry before ordering.

    ENVIRONMENT

    Environment

    Catalog protection is IP67. Verify washdown, outdoor, corrosive, or hazardous exposure before replacement.

    ELECTRICAL

    Electrical match

    Catalog signal is Analog. Confirm excitation, mV/V output, impedance, wiring color code, and indicator/transmitter input.

    04 / 06Installation notes

    A load cell is only correct when the assembly around it is correct.

    The safest way to quote or replace a load cell is to verify the installed geometry and the electrical interface together. Capacity alone is not enough.

    • Match mounting holes, load point, thread, and installed height
    • Confirm cell count and junction-box wiring
    • Confirm material and protection rating for the environment
    • Confirm rated output, excitation, and input/output impedance
    • Keep datasheets, photos, and old part numbers with the service record
    05 / 06Technical data

    Catalog attributes for this load cell.

    MaterialCoated alloy steel
    ProtectionIP67
    SignalAnalog
    ApplicationMixer and feeder wagon load-cell replacement for agricultural equipment
    Input impedance349-450 ohms
    Output impedance349-356 ohms
    Operating temperature-20 to +70 °C
    06 / 06Part number reference

    Order code and fit FAQ.

    ProductOrder codeManufacturer part no.
    VPG 5330 Shear Beam Load Cell108995330-6150kg

    Is the SKU enough to confirm replacement?

    No. Use the SKU as the order code, then confirm model, capacity, dimensions, wiring, signal, and environment.

    What if some catalog attributes are blank?

    Treat blank attributes as items to confirm before ordering. The description only uses available catalog data and conservative application guidance.

    Can WeightechUSA help identify a match?

    Yes. Send photos of the installed cell, the label, mounting dimensions, cable colors, capacity, and the scale application.

    DIMENSIONS

    Outline dimensions.

    VPG 5330 5330-6150kg Shear Beam Load Cell dimensions drawing
    Source: manufacturer datasheet

    Talk to a WeightechUSA load-cell specialist.

    Send the old load-cell label, capacity, dimensions, cable details, and application. We will confirm whether 10899 is the right fit.

    Email SalesView DatasheetCall +1 (954) 666-0877 × 305