YOUR STORE FOR LOAD CELLS, SCALE, WEIGHT INDICATORS.
B3G S-Type Load Cell · 2000 lb · B3G-N10-2K-6YBZemic B3G-2,000lb B3G-N10-2K-6YB S-Type Tension/Compression Load Cell
- Description
- Additional Information
- 01 / 06S-type tension/compression load cells
S-type tension/compression load cells for confirmed-fit replacement and scale builds.
The Zemic B3G-2,000lb B3G-N10-2K-6YB S-Type Tension/Compression Load Cell is an S-type tension/compression load cell rated 2,000 lb. Use it as a replacement or new-build component only after confirming capacity, dimensions, material, seal rating, electrical signal, and wiring against the scale assembly. The catalog identifies the manufacturer as Zemic and the model / part number as B3G-N10-2K-6YB.
2,000 lbRated capacityStainless steelMaterialIP67 (EN 60529)ProtectionAnalogSignal02 / 06Application fitWhere this load cell belongs.
S-type cells are used for suspended, tension, and inline force applications where the force path must stay centered.
01Hanging scales
S-type geometry fits suspended weighing with clevises, rod ends, or tension hardware.
tension02Force measurement
Useful where the system measures pull, compression, or bidirectional force.
force03Retrofit work
Match thread, capacity, material, and wiring before swapping an existing S-beam.
replacement03 / 06Mechanical and electrical fitConfirm the details before replacement.
CAPACITYCapacity and load path
Confirm 2,000 lb against dead load, live load, impact, and load distribution.
MECHANICALMechanical fit
Check mounting pattern, installed height, load point, cable exit, and platform or vessel geometry before ordering.
ENVIRONMENTEnvironment
Catalog protection is IP67 (EN 60529). Verify washdown, outdoor, corrosive, or hazardous exposure before replacement.
ELECTRICALElectrical match
Catalog signal is Analog. Confirm excitation, mV/V output, impedance, wiring color code, and indicator/transmitter input.
04 / 06Installation notesA load cell is only correct when the assembly around it is correct.
The safest way to quote or replace a load cell is to verify the installed geometry and the electrical interface together. Capacity alone is not enough.
- Match mounting holes, load point, thread, and installed height
- Confirm cell count and junction-box wiring
- Confirm material and protection rating for the environment
- Confirm rated output, excitation, and input/output impedance
- Keep datasheets, photos, and old part numbers with the service record
05 / 06Technical dataCatalog attributes for this load cell.
Material Stainless steel Protection IP67 (EN 60529) Signal Analog Cable length 6 m (20 ft) Cable type Shielded 4-conductor, Ø5 mm Manufacturer Zemic Manufacturer part number B3G-N10-2K-6YB Rated capacity 2,000 lb Capacity 2000 lb Capacity in pounds 2000 lb Approval OIML R60 C3 · NTEP 06-099A1 · PTB D09-06.07 Rated output 3.0 ± 0.008 mV/V Rated output tolerance ± 0.008 mV/V Recommended excitation 5 ~ 12 VDC Maximum excitation 18 VDC Input impedance 430 ± 60 Ω Output impedance 351 ± 2 Ω Insulation resistance ≥ 5000 MΩ @ 50 VDC Safe overload 150 %FS Ultimate overload 300 %FS Operating temperature −35 to +65 °C Number of wires 4 Output sensitivity 3.0 ± 0.008 mV/V Zero balance ≤ ±1.0 %FS Compensated temperature −10 to +40 °C Storage temperature −40 to +70 °C 06 / 06Part number referenceOrder code and fit FAQ.
Product Order code Zemic B3G-2,000lb B3G-N10-2K-6YB S-Type Tension/Compression Load Cell 13204 Is the SKU enough to confirm replacement?
No. Use the SKU as the order code, then confirm model, capacity, dimensions, wiring, signal, and environment.
What if some catalog attributes are blank?
Treat blank attributes as items to confirm before ordering. The description only uses available catalog data and conservative application guidance.
Can WeightechUSA help identify a match?
Yes. Send photos of the installed cell, the label, mounting dimensions, cable colors, capacity, and the scale application.
DIMENSIONSOutline dimensions.
Source: manufacturer datasheet Talk to a WeightechUSA load-cell specialist.
Send the old load-cell label, capacity, dimensions, cable details, and application. We will confirm whether 13204 is the right fit.
Email SalesView DatasheetCall +1 (954) 666-0877 × 305 Signal Analog Protection class IP67 Material Stainless Steel Compensated temp range −10 to +40 °C Input impedance 430 ± 60 Ω Insulation resistance ≥ 5000 MΩ @ 50 VDC Internal Battery -- Excitation voltage 5 ~ 12 V (Max 18 V) Maximum excitation 18 VDC Maximum number of intervals 10000 Maximum safe overload 150 %FS Minimum dead load 0% Emax NTEP/OIML NTEP Class III/IIIL · CC 06-099A1 Operating temp range −35 to +65 °C Output impedance 351 ± 2 Ω Rated capacity 2,000 lb Rated output 3.0 ± 0.008 mV/V Rated output tolerance ± 0.008 mV/V Recommended excitation 5 ~ 12 VDC Recommended torque 75 Nm Sensitivity 3.0 ± 0.008 mV/V Storage temp range −40 to +70 °C Ultimate central overload 300 %FS Y=Emax/Vmin 10000 Zero balance ≤ ±1.0 %FS Manufacturer Zemic Capacity 2000 lb Cable type Shielded 4-conductor, Ø5 mm Cable length 6 m (20 ft) Interchangeable Revere 9363 Number of Wires 4 wires Manufacturer's Part Number B3G-N10-2K-6YB Approval NTEP Short name B3G S-Type Load Cell · 2000 lb · B3G-N10-2K-6YB Hero chips 2,000 lb; IP67; Stainless Steel; Analog signal; NTEP
