
The Dinamica Generale 969-0624 Mobile Weigh Bar 2.875" (model DG20879/73-NM) is a sealed alloy-steel weigh bar rated 15,000 lb mobile and 22,500 lb static. It carries a Ø2.874 in. / 73 mm bushing bore — nominal 2-7/8 in., the size in the product name — on a 19.63 in. bar, and ships with a 30.2 ft. sheathed cable terminated in a 5-pin SPM connector with the Dinamica Generale spring guard. Order it as SKU 22624 after confirming bushing bore, bar length, hole pattern, rated output, and connector against the installed bar.
Dinamica Generale mobile weigh bars are built for agricultural mixer and feeder wagons, grain carts, manure spreaders, forage wagons, seed tenders, and similar mobile equipment that weighs while it moves. Confirm the installed bar by part number, bushing bore, bar length, connector, cable length, and whether the machine is rated on the mobile or static value.
Built for agricultural weighing where feed, forage, grain, manure, or mineral material is loaded, mixed, transported, or dispensed on a moving machine.
Match the old Dinamica Generale, Digi-Star, Weigh-Tronix, or OEM part number plus the bushing bore, bar length, and hole pattern before ordering.
This bar ships with a 30.2 ft. sheathed cable terminated in a 5-pin SPM connector with the DG spring guard — confirm the mating connector on the machine.
Rated 15,000 lb mobile / 22,500 lb static. Confirm against dead load, live load, impact, and how the load is distributed across the bars.
Confirm the Ø2.874 in. / 73 mm bushing bore (nominal 2-7/8 in.), 19.63 in. bar length, 7.205 in. mounting length, and the 3× Ø1.043 in. hole pattern against the frame.
IP68 sealed, coated alloy steel, rated −40 to +70 °C. Verify washdown, outdoor, and corrosive exposure before replacement.
Full-bridge analog output: 0.98 mV/V at static rated load, 0.65 mV/V at mobile rated load (2 mV/V referenced to 20,879 kg). Confirm excitation and indicator input.
9.2 m / 30.2 ft sheathed cable, SPM connector, pins A–E. Confirm the machine harness uses the same pinout before splicing or adapting.
The safest way to quote or replace a weigh bar is to verify the installed geometry and the electrical interface together. Capacity alone is not enough — a bar with the right rating but the wrong bushing bore or connector will not go on the machine.
Both sheets of Dinamica Generale drawing 969-0624 rev. A0 are reproduced below. Use them to confirm the mechanical envelope, the bushing bore and tolerance, the three mounting holes, and the positive load direction before ordering.


| Bushing bore | Ø73 mm +0 / −0.1 (bushing tolerance 73 +0.2 / +0.3) |
| Overall length | 498.6 mm |
| Mounting length | 183 mm (tube 184.2 mm) |
| Mounting holes | 3× Ø26.5 mm ±0.2, spaced 38.1 / 54 / 38.1 mm |
| Body height | 90 mm (envelope 115 mm × 189 mm) |
| Cell weight | 16 kg |
| Bushing bore | Ø2.874 in. +0 / −0.004 |
| Overall length | 19.63 in. |
| Mounting length | 7.205 in. (tube 7.252 in.) |
| Mounting holes | 3× Ø1.043 in. ±0.0079, spaced 1.5 / 2.125 / 1.5 in. |
| Body height | 3.543 in. (envelope 4.528 in. × 7.441 in.) |
| Cell weight | 34.485 lb |
| Function | Wire color | SPM pin |
|---|---|---|
| Input + | Red | B |
| Input − | Black | D |
| Output + | Green | C |
| Output − | White | A |
| Braid / shield | Yellow | E |
| Manufacturer | Dinamica Generale |
| Part number | 969-0624 |
| Model code | DG20879/73-NM |
| Type | Load pins and weigh bars — mobile weigh bar |
| Mobile rated capacity | 15000 Lbs. / 6804 Kg |
| Static rated capacity | 22500 Lbs. / 10206 Kg |
| Rated output | Static: 0.98 mV/V | Mobile: 0.65 mV/V |
| Capacity weight | 20879 KG @ 2mV/V |
| Bushing / load point diameter | 2.874 in. / 73 mm (nominal 2-7/8 in.) |
| Bar length | 19.63 in. (498.6 mm) |
| Cell weight | 16 kg (metric sheet) / 34.485 lb (imperial sheet) |
| Material | Coated alloy steel |
| Protection | IP68 |
| Signal | Analog full bridge |
| Number of wires | 5 wires (4 + braid) |
| Cable length | 30.2 ft. / 9.2 m |
| Cable termination | Sheath + SPM connector |
| Operating temperature | −40 to +70 °C |
| Application | Mixer and feeder wagon load-cell replacement for agricultural equipment |
| Drawing revision | 969-0624 rev. A0, 22/08/2024 |
| Product | Manufacturer part | Order code |
|---|---|---|
| Dinamica Generale 969-0624 Mobile Weigh Bar 2.875" | 969-0624 | 22624 |
No. Use 22624 as the order code, then confirm bushing bore, bar length, hole pattern, cable length, connector, and rated output against the installed bar.
Dinamica Generale rates mobile weigh bars twice: a static rating (22,500 lb / 10,206 kg) for stationary weighing and a lower mobile rating (15,000 lb / 6,804 kg) for weighing while the machine is moving. Use the mobile figure for mixer and feeder wagons.
It is the bridge output at the static rated load. The cell itself is a nominal 2 mV/V full bridge referenced to 20,879 kg — the capacity encoded in the DG20879/73-NM model code — so the datasheet figures are the derated working values.
Yes. Send photos of the installed bar, the label, the bushing bore and bar length, the cable colors or connector, and the machine model.
Send the old weigh-bar label, bushing bore, bar length, cable and connector details, and the machine model. We will confirm whether 22624 is the right fit.
Phone 954-666-0877 x305 · [email protected] · Davie, FL
| Signal | Analog |
|---|---|
| Protection class | IP68 |
| Material | Coated |
| Internal Battery | -- |
| Operating temp range | −40 to +70 °C |
| Rated output | Static: 0.98 mV/V | Mobile: 0.65 mV/V |
| Manufacturer | Dinamica Generale |
| Cable type | Sheath + SPM connector |
| Cable length | 30.2 ft. / 9.2 m |
| Mobile Rated capacity | 15000 Lbs. / 6804 Kg |
| Static Rated Capacity | 22500 Lbs. / 10206 Kg |
| Load Point Diameter | 2.875 in. |
| Fixing Point Diameter | 2.875 in. |
| Bar Length | 19.63 in. |
| Number of Wires | 5 wires |
| Manufacturer's Part Number | 969-0624 |
| Hero chips | IP68; Coated; Analog signal; 30.2 ft. / 9.2 m cable; 5 wires |