
The HBM 1-PW15AHC3 is a hermetically sealed single point load cell family. This page describes the family; use the table below to select the SKU your application requires.
Values that differ per SKU are listed in the table below and on each SKU's own page.
| Material | Stainless steel |
| Protection | IP68 / IP69K |
| Signal | Analog |
| Input impedance | 300 – 500 Ω |
| Output impedance | 300 – 500 Ω |
| Insulation resistance | > 1 GΩ (100 VDC) |
| Compensated temperature | −10 to +40 °C |
| Operating temperature | −10 to +50 °C |
| Storage temperature | −25 to +70 °C |
| Reference voltage | 5 V |
| Supply voltage range | 1 to 12 V |
| Safe overload | 150% FS |
| Lateral load limit | 300% FS |
| Ultimate overload | 300% FS |
| Non-linearity / hysteresis | ± 0.0166% Cn (typical) |
| Deflection at Emax, approx. | < 0.5 mm |
| Cable | Shielded 6-wire round cable, PVC (3 m) or PUR (6 m) |
| Rated output | 2.0 ± 0.2 mV/V |
| Capacity | Manufacturer part number | SKU | Approval | Price |
|---|---|---|---|---|
| 10 kg | 1-PW15AHC3/10kg | 10361 | FM, NTEP, OIML | $1,206.00 |
| 20 kg | 1-PW15AHC3/20KG-1 | 10362 | FM, NTEP, OIML | $1,208.00 |
| 50 kg | 1-PW15AHC3/50KG-1 | 10363 | FM, NTEP, OIML | $1,208.00 |
| 100 kg | 1-PW15AHC3/100KG-1 | 10364 | — | $1,208.00 |

Send the model and application. We will confirm which 1-PW15AHC3 SKU fits.
Email SalesView DatasheetCall +1 (954) 666-0877 × 305| Signal | Analog |
|---|---|
| Protection class | Waterproof |
| Material | Stainless Steel |
| Internal Battery | -- |
| Maximum excitation | 15 V |
| Maximum safe overload | 150 % of Emax |
| Max platform size | - |
| Operating temp range | -10...+50[+14...+122 F] |
| Recommended excitation | 5 V |
| Recommended torque | - |
| Sensitivity | 2.0 +- 0.2 mV/V |
| Storage temp range | -25...+70[-13...+158 F] |
| Manufacturer | HBM |
| Cable type | 6 wires, PVC |
| Cable length | 10ft/ 3.1 m |
| Approval | NTEP |
| Short name | PW15AH Single Point Load Cell |