YOUR STORE FOR LOAD CELLS, SCALE, WEIGHT INDICATORS.
Laumas W100 Weight Indicator with 0-10 VDC Weight-Reading Input
SKU
30505
- Description
- Additional Information
- 01 / 05Weight Indicator
Laumas W100 weight indicator, 0-10 VDC weight input.
The Laumas W100 is a DIN-box weight indicator for front panel mounting, with a 6-digit red LED display, RS485/RS232 serial ports (Modbus RTU) and one dedicated load cell input. This is the 0-10 VDC weight input version, Laumas order code W100 + OPZWING010: weight reading from 0-10 VDC input. It is supplied as a complete unit.
6digits14 mm red LED display5Relay outputs (this version)3Optoisolated digital inputs10,000dNTEP nmax, Class III/IIIL02 / 05This versionWhat this version includes.
Adds weight reading from a 0-10 VDC input (15 kohm).
Laumas order code(s) W100 + OPZWING010 SKU 30505 Relay outputs 5 - max 115 VAC/150 mA Optoisolated digital inputs 3 - 5-24 VDC PNP Other combinations of options are available on request. The analog output and the additional RS485 port cannot be combined (datasheet: select one option among those marked with an asterisk).
- RS485/RS232 serial ports for communication via Modbus RTU, ASCII Laumas or continuous one-way transmission protocols.
- Five relay outputs controlled by the setpoint values or via protocols (four outputs if the analog output is present).
- Three optoisolated PNP digital inputs: status reading via serial communication protocols (two inputs if the analog output is present).
- 1 load cell dedicated input.
- Weight reading from 0-10 VDC input, 15 kohm (option OPZWING010 built in).
03 / 05Technical dataVerified specifications for this version.
Manufacturer Laumas Laumas order code(s) (MPN) W100 + OPZWING010 SKU 30505 Version 0-10 VDC weight input Power supply and consumption 12-24 VDC +/-10%; 5 W Number of load cells / supply up to 8 (350 ohm) - 4/6 wires - 5 VDC/120 mA (load cell input: 1, dedicated) A/D converter 24 bit (16000000 points) - 4.8 kHz Conversions per second 300/s Measurement range +/-39 mV Usable load cells sensitivity +/-7 mV/V Divisions (measurement range +/-10 mV, sensitivity 2 mV/V) +/-999999 - 0.01 uV/d Display range +/-999999 Decimals / display increments 0-4 - x1 x2 x5 x10 x20 x50 x100 Digital filter / readings per second 10 levels - 5-300 Hz Linearity <0.01% full scale Thermal drift <0.0005% full scale/degC Relay outputs 5 - max 115 VAC/150 mA Optoisolated digital inputs 3 - 5-24 VDC PNP Weight-reading input 0-10 VDC (15 kohm) Serial ports RS485, RS232 Protocols Modbus RTU, ASCII Laumas, continuous one-way transmission Baud rate 1200, 2400, 4800, 9600, 19200, 38400, 115200 (bit/s) Display 6-digit semi-alphanumeric red LED, 14 mm height Signalling LEDs / keyboard 8 signalling LEDs / 4-key keyboard Real-time clock Clock/calendar with buffer battery Enclosure DIN box for front panel mounting, 96 x 48 x 130 mm (drilling template 92 x 45 mm) Front panel protection IP54 (IP65 front optional with panel gasket OPZW48X96IP65) Connections Removable screw terminal blocks Humidity (condensate free) 85% Storage temperature -30 degC +80 degC Working temperature -20 degC +60 degC UL Recognized component versions relay outputs 5 - max 30 VAC, 60 VDC/150 mA; working temperature -20 degC +50 degC; equipment to be powered by 12-24 VDC LPS or Class 2 power source Load cell connection (installation manual) 6-wire load cell input; 4-wire load cells connect with jumpers between EX- and REF- and between EX+ and REF+ Load cell capacity supplied (installation manual) up to eight 350 ohm or sixteen 700 ohm load cells Digital input functions (installation manual) NET/GROSS WEIGHT, SEMI-AUTOMATIC ZERO, PEAK, PRINT, LIMIT or REMOTE CONTROL 04 / 05FeaturesDisplay, hardware, main functions and legal-for-trade features.
Description
- Weight indicator in DIN box suitable for front panel mounting; dimensions 96 x 48 x 130 mm (drilling template 92 x 45 mm).
- 6-digit semi-alphanumeric red LED display, 14 mm height.
- 8 signalling LEDs and a 4-key keyboard.
- IP54 front panel protection rating (IP65 front optional).
- Real-time clock/calendar with buffer battery.
- Removable screw terminal blocks.
- 1 dedicated load cell input; up to 8 load cells (350 ohm) in parallel through a junction box.
- Configured and managed with the free "Instrument Manager" PC software, downloadable from www.laumas.com.
Main functions
- Connections to: PLC via analog output (on request); PC/PLC via RS485/RS232 (up to 99 instruments with line repeaters, up to 32 without line repeaters); remote display and printer via RS485/RS232; up to 8 load cells in parallel by junction box; intelligent junction box or other multichannel instruments (digital equalization, load distribution analysis and automatic diagnostics); IoT gateway for cloud connection via RS485.
- Digital filter to reduce the effects of weight oscillation.
- Theoretical calibration (via keyboard) and real calibration (with sample weights and the possibility of weight linearization up to 8 points).
- Tare weight zero setting; automatic zero setting at power-on; gross weight zero tracking; semi-automatic zero.
- Semi-automatic tare (net/gross weight) and preset tare.
- Displaying of the maximum weight value reached (peak).
- Direct connection between RS485 and RS232 without converter.
- Hysteresis and setpoint value setting.
- Weight value printing with date and time via keyboard or external contact.
- The indicator can be used as a remote display with setpoint.
- 12 groups selection by 5 setpoint via external selector switch or contact (option on request).
- Labeling machine management.
Approved versions for legal for trade use
- Approved versions for legal for trade use.
- System parameters management protected by qualified access via software (password), hardware or fieldbus.
- Weight subdivisions displaying (1/10 e).
- Three operation modes: single interval, multiple range or multi-interval.
- Net weight zero tracking.
- Calibration.
- Alibi memory (option on request, OPZWALIBI).
- Values that can be printed via keyboard or external contact: gross weight, net weight, tare, preset tare, date, time, ID code (alibi memory).
- On request: label support for initial verification.
05 / 05CertificationsApprovals and standards.
Certifications
- OIML R76:2006, class III, 3x10000 divisions, 0.2 uV/VSI / OIML R61 - WELMEC Guide 8.8:2011 (MID)
- NTEP - nmax 10000 - Class III/IIIL - complies with United States regulations for legal for trade use
- UL Recognized component - complies with United States and Canada regulations
- Complies with the Eurasian Customs Union regulations
- Equivalent of the CE marking for the United Kingdom
- NMI Trade Approved - complies with Australian market regulations for legal for trade use
- Complies with New Zealand regulations for legal for trade use
- Complies with United Kingdom regulations for legal for trade use
- Complies with the Brazilian regulations for legal for trade use
- Complies with Chinese market regulations for legal for trade use
Certifications on request
- Conformity assessment (initial verification) in combination with a Laumas weighing module
- Support for metric label (dimensions: 124x77x1.5 mm)
- Complies with the regulations of the Russian Federation for legal for trade use
Metrological data (type approved instruments)
Metrological specifications of type approved instruments OIML NTEP INMETRO Applied standards by region EU: 2014/31/UE; OIML R76:2006; EN45501:2015. Russian Federation: GOST OIML R76-1-2011. United Kingdom: Non-automatic Weighing Instrument Regulations 2016. Australia: National Measurement Regulations 1999. New Zealand: Weights and Measures Regulations 1999. China: Law on Metrology of the People's Republic of China USA: NIST Handbook 44, 2020; NCWM Pub 14, 2021 Brazil: Portaria Inmetro N 157/2022 Operation mode single interval, multi-interval, multiple range single interval, multi-interval, multiple range single interval, multi-interval, multiple range Accuracy class III or IIII III or IIIL III Maximum number of scale verification divisions 10000 (class III); 1000 (class IIII) 10000 (class III/IIIL) 10000 (class III) Minimum input signal for scale verification division 0.2 uV/VSI - 0.2 uV/VSI Working temperature -10 degC +40 degC -10 degC +40 degC (+14 degF +104 degF) -10 degC +40 degC Part number referenceOrder code.
Product Order code Laumas W100 Weight Indicator with 0-10 VDC Weight-Reading Input 30505 Options on request (IP65 panel gasket, external 5-relay module, alibi memory, E/EC setpoint group selection and more) are listed on the Laumas W100 family page. Questions or a quote: 954-666-0877 x305 or [email protected].
Talk to a WeightechUSA specialist.
Send the model, the options you need and the application. We will confirm the Laumas order code and fit.
Email SalesView DatasheetCall +1 (954) 666-0877 × 305 Number of divisions +/-999999 - 0.01 uV/d (with measurement range +/-10 mV and sensitivity 2 mV/V) Protection class IP54 (front) Communication interface RS485, RS232 - Modbus RTU, ASCII Laumas or continuous one-way transmission Digital filter 10 levels - 5-300 Hz Display 6-digit semi-alphanumeric red LED, 14 mm height Display height 14 mm Dimension 96 x 48 x 130 mm (drilling template: 92 x 45 mm) Input power supply 12-24 VDC +/-10%; 5 W Internal Battery Buffer battery for real-time clock/calendar Keys 4-key keyboard Load cell connection 4/6 wires Excitation voltage 5 VDC/120 mA NTEP/OIML NTEP nmax 10000 Class III/IIIL; OIML R76:2006 class III 3x10000 divisions 0.2 uV/VSI Storage temp range -30 degC +80 degC Manufacturer Laumas Version 0-10 VDC weight input Number of load cells up to 8 (350 Ω) - 4/6 wires • 5 VDC/120 mA Thermal Drift <0.0005% full scale/degC A/D Converter 24 bit (16000000 points) - 4.8 kHz Measurement range +/-39 mV Usable load cells sensitivity +/-7 mV/V Conversions per second 300/s Display range +/-999999 Decimals 0-4 - x1 x2 x5 x10 x20 x50 x100 Relay outputs 5 - max 115 VAC/150 mA Optoisolated digital inputs 3 - 5-24 VDC PNP Serial ports RS485, RS232 Baud rate 1200, 2400, 4800, 9600, 19200, 38400, 115200 (bit/s) Humidity 85% Working temp range -20 degC +60 degC Linearity <0.01% full scale Manufacturer's Part Number W100, OPZWING010 Certifications NTEP, OIML, INMETRO Approval NTEP, OIML Indicator_type Weight Indicator
