
USR-LG206-H-P LoRa ConverterPUSR USR-LG206-H-P Serial RS232 / RS485 to LoRa Converter, Point-to-Point, 803-930 MHz
- Description
- Additional Information
- 01 / 05PUSR USR-LG206-H-P LoRa converter
Serial to LoRa radio link for RS232 and RS485 devices.
The PUSR USR-LG206-H-P (SKU 13532) is a half-duplex serial-to-LoRa converter that uses the LoRa point-to-point protocol. It sends and receives data through its RS232 or RS485 serial port and supports one-to-one and one-to-many communication. The ‘-H’ model works in the 803–930 MHz band.
803–930MHzFrequency band (-H model)3,500mMax. distance, open area (test conditions below)5–36VWorking voltageRS232 / RS485Serial interface02 / 05Work modesThree ways to move serial data over LoRa.
01Transparent transmission
Data content is not altered. Two devices exchange data without any transport protocol when they use the same rate level, channel and destination address (or the broadcast address).
02Fixed-point transmitting
The first two bytes of the data set the destination address and the third byte the channel, so the destination can change from one transmission to the next.
03Broadcast and AT commands
Destination address 65535 broadcasts to all units on the same channel and rate. AT command mode sets all parameters through the serial port.
03 / 05Radio and protectionSettings and built-in protection.
01Rate, channel and power
Ten LoRa air-rate levels from 268 bps to 21,875 bps, channels 0–127, transmit power 10–20 dBm, optional forward error correction for more stable transmission at a lower rate.
02Data encryption
Data is encrypted during transmission. The key is set by AT command and cannot be read back.
03Electrical protection
ESD protection, power-supply anti-surge, RS485 anti-surge and a hardware watchdog.
04Link test and power modes
RSSI and SNR indication helps judge link quality. Run mode receives continuously; wake-up mode adds a wake-up code before each transmission.
04 / 05Technical dataUSR-LG206-H-P specifications.
Brand / model PUSR USR-LG206-H-P (Jinan USR IOT Technology) SKU 13532 Type Half-duplex serial to LoRa converter, point-to-point protocol Frequency band 803-930 MHz (-H model; channel 0-127, 803 + channel MHz) Transmitting power 10-20 dBm (default 20 dBm) Receiving sensitivity -138.5 dBm at 0.268 kbps Transmission distance 3,500 m. Open area, clear weather, 20 dBm, 5 dBi antenna, height over 2 m, 0.268 kbps air rate Antenna SMA Data interface Serial port, RS232 / RS485 Baud rate 1200-115200 bps (default 115200, 8N1) Working voltage 5-36 V Working current Transmitting 45 mA at 12 V; standby 12 mA at 12 V Working temperature -30 to +80 C Storage temperature -45 to +90 C Working humidity 10-90 % RH Max. data packet 252 bytes 05 / 05Part number and FAQOrder code.
Product Order code PUSR USR-LG206-H-P serial to LoRa converter, 803-930 MHz 13532 What does the -H in the model name mean?
The manual lists two models: USR-LG206-L-P (398–525 MHz) and USR-LG206-H-P (803–930 MHz). This product is the -H-P model.
What range can I expect?
The manual quotes 3,500 m in an open area at 20 dBm with a 5 dBi antenna and the slowest air rate (0.268 kbps). Its feature list quotes 2,300 m with a 3.5 dBi antenna. Real range depends on the site, antenna and rate.
How is it configured?
By AT commands over the serial port: work mode, serial parameters, rate level, channel, destination address, power and encryption key.
Talk to a WeightechUSA specialist.
Questions about fit, calibration, certification, or volume pricing? Our team works on quotes the same day.
Email SalesView DatasheetCall +1 (954) 666-0877 × 305 Internal Battery -- Working temp range -30℃~+80℃ Frequency Band H:803-930MHz Transmitting power 10dBm~20dBm Receiving sensitivity [email protected] Transmission distance 3500 meters. Test condition: Open area, clear weather, 20dBm transmitting power, 5dBi antenna gain, height is greater than 2 meters, 0.268K air rate. Antenna SMA Data interface Support RS232/RS485. Baud rate: 1200bps~115200bps Working voltage 5V~36V Working current Standby mode: 12mA@12V., Transmitting current: 45mA@12V Working Humidity 10~90%RH Short name USR-LG206-H-P LoRa Converter