YOUR STORE FOR LOAD CELLS, SCALE, WEIGHT INDICATORS.
Schenck Process SENSIQ-10kg D725417.01 Shear Beam Load Cell
- Description
- Additional Information
- 01 / 07Shear beam and bending beam load cells
Shear beam and bending beam load cells for confirmed-fit replacement and scale builds.
The Schenck Process SENSIQ-10kg D725417.01 Shear Beam Load Cell is a shear beam or bending beam load cell rated 10 kg. Use it as a replacement or new-build component only after confirming capacity, dimensions, material, seal rating, electrical signal, and wiring against the scale assembly. The catalog identifies the manufacturer as Schenck Process and the model / part number as D725417.01.
10 kgRated capacityStainless SteelMaterialIP68ProtectionAnalogSignal02 / 07Application fitWhere this load cell belongs.
Shear and bending beam cells are common choices for floor scales, livestock platforms, tanks, hoppers, and low-to-mid capacity industrial scales.
01Platforms and floor scales
A practical load-cell family for fabricated platforms and summing-box systems.
platform02Tanks and hoppers
Works well when mounts control side load and vessel movement.
vessel03Livestock and agriculture
Often used in platform and chute builds when capacity and environmental rating fit.
ag scale03 / 07Mechanical and electrical fitConfirm the details before replacement.
CAPACITYCapacity and load path
Confirm 10 kg against dead load, live load, impact, and load distribution.
MECHANICALMechanical fit
Check mounting pattern, installed height, load point, cable exit, and platform or vessel geometry before ordering.
ENVIRONMENTEnvironment
Catalog protection is IP68. Verify washdown, outdoor, corrosive, or hazardous exposure before replacement.
ELECTRICALElectrical match
Catalog signal is Analog. Confirm excitation, mV/V output, impedance, wiring color code, and indicator/transmitter input.
04 / 07Installation notesA load cell is only correct when the assembly around it is correct.
The safest way to quote or replace a load cell is to verify the installed geometry and the electrical interface together. Capacity alone is not enough.
- Match mounting holes, load point, thread, and installed height
- Confirm cell count and junction-box wiring
- Confirm material and protection rating for the environment
- Confirm rated output, excitation, and input/output impedance
- Keep datasheets, photos, and old part numbers with the service record
05 / 07Dimensions and connectionsUse the available images to confirm the mechanical envelope and cable connection.
Dimension reference 06 / 07Technical dataCatalog attributes for this load cell.
Material Stainless Steel Protection IP68 Signal Analog Cable length 3 m Cable type 6-wire PVC cable, shielded Manufacturer Schenck Process Manufacturer part number D725417.01 Rated capacity 10 kg Capacity weight 10 kg Accuracy C3 Approval OIML R60 C3 (to C6) Rated output 2 mV/V Rated output tolerance ±1 µV/V Recommended excitation 5–10 V Maximum excitation 18 V Input impedance 350–480 Ω Output impedance 356 ± 0.12 Ω (C3) Combined error ≤ ±0.02 %Cn (C3) Creep error ≤ ±0.016 %Cn / 30 min (C3) Safe overload 15 kg Ultimate overload 30 kg Operating temperature −40 to +70 °C Output sensitivity 2 mV/V Zero balance ± 1 %Cn Compensated temperature −10 to +40 °C 07 / 07Part number referenceOrder code and fit FAQ.
Product Order code Schenck Process SENSIQ-10kg D725417.01 Shear Beam Load Cell 15499 Is the SKU enough to confirm replacement?
No. Use the SKU as the order code, then confirm model, capacity, dimensions, wiring, signal, and environment.
What if some catalog attributes are blank?
Treat blank attributes as items to confirm before ordering. The description only uses available catalog data and conservative application guidance.
Can WeightechUSA help identify a match?
Yes. Send photos of the installed cell, the label, mounting dimensions, cable colors, capacity, and the scale application.
Talk to a WeightechUSA load-cell specialist.
Send the old load-cell label, capacity, dimensions, cable details, and application. We will confirm whether 15499 is the right fit.
Email SalesView DatasheetCall +1 (954) 666-0877 × 305 Signal Analog Protection class IP68 Material Stainless Steel Combined error ≤ ±0.02 %Cn (C3) Compensated temp range −10 to +40 °C Creep error 20mins ≤ ±0.016 %Cn / 30 min (C3) Hysteresis error ±0.016% Input impedance 350–480 Ω Internal Battery -- Load cell connection Input-: black; Input+: blue; Shield: black/yellow; Output-: red; Output+: white; Sense-: gray; Sense+: green Maximum excitation 18 V Maximum safe overload 15 kg NTEP/OIML OIML R60 Operating temp range −40 to +70 °C Output impedance 356 ± 0.12 Ω (C3) Rated capacity 10 kg Rated output 2 mV/V Rated output tolerance ±1 µV/V Recommended excitation 5–10 V Storage temp range -50°C to +85°C Temp effect on output ±0.008%/10K Temp effect on zero ±0.0125%/10K Ultimate central overload 30 kg Zero balance ± 1 %Cn Manufacturer Schenck Process Cable type 6-wire PVC cable, shielded Cable length 3 m Accuracy C3 Manufacturer's Part Number D725417.01 Approval OIML R60 C3
