Model Tedea 1242 is a high accuracy, low profile, low cost, two-beam, single-point load cell ideally suited for industrial applications where space is limited. Typical applications include platforms, hanging scales and personal weighers. This high accuracy load cell is OIML R60 class C6 approved. For hazardous environments this load cell has
ATEX approval, as well as Factory Mutual approval. A special humidity-resistant protective coating assures long-term stability over the entire compensated temperature range. The two additional sense wires feed back the voltage
reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension can be achieved by feeding this voltage into the appropriate electronics.
Tedea-Huntleigh 1242 Datasheet
Load Cell 1242 APPLICATIONS
Approval | ATEX, FM, NTEP, OIML |
---|---|
Signal | Analog |
Protection class | IP66 |
Material | Aluminum |
Internal Battery | -- |
Maximum excitation | 15 VDC or VAC RMS |
Maximum safe overload | 150 % of R.C. |
Max platform size | 400x400 |
Operating temp range | -20 to -70 C |
Recommended excitation | 10 VDC or VAC RMS |
Recommended torque | Up to 30 kg; 7.0, 35 kg and above: 10.0 |
Sensitivity | 2.0 mV/V |
Storage temp range | - |
Manufacturer | Vishay-Tedea |
Cable type | 6 wire, PVC, single floating screen |
Cable length | 1.5 m |