YOUR STORE FOR LOAD CELLS, SCALE, WEIGHT INDICATORS.
5203-25Klb Double-Ended BeamRevere 5203-25Klb 05203-025E-3S-01F Double-Ended Beam Load Cell
- Description
- Additional Information
- 01 / 06Double-ended beam and weighbridge load cells
Double-ended beam and weighbridge load cells for confirmed-fit replacement and scale builds.
The Revere 5203-25Klb 05203-025E-3S-01F Double-Ended Beam Load Cell is a double-ended beam load cell rated 25K lb. Use it as a replacement or new-build component only after confirming capacity, dimensions, material, seal rating, electrical signal, and wiring against the scale assembly. The catalog identifies the manufacturer as Vishay-Revere and the model / part number as 05203-025E-3S-01F.
25K lbRated capacityNickel-plated alloy steelMaterialIP67ProtectionAnalogSignal02 / 06Application fitWhere this load cell belongs.
Double-ended beam cells are commonly used in truck scales, rail scales, hoppers, and other heavy multi-cell systems.
01Truck and rail scales
A strong fit for weighbridges and vehicle-scale load points.
weighbridge02Heavy vessels
Works in silo, hopper, and tank weighing when the mount controls load introduction.
vessel03Service replacement
Confirm cups, links, mounts, and cable exit before ordering.
retrofit03 / 06Mechanical and electrical fitConfirm the details before replacement.
CAPACITYCapacity and load path
Confirm 25K lb against dead load, live load, impact, and load distribution.
MECHANICALMechanical fit
Check mounting pattern, installed height, load point, cable exit, and platform or vessel geometry before ordering.
ENVIRONMENTEnvironment
Catalog protection is IP67. Verify washdown, outdoor, corrosive, or hazardous exposure before replacement.
ELECTRICALElectrical match
Catalog signal is Analog. Confirm excitation, mV/V output, impedance, wiring color code, and indicator/transmitter input.
04 / 06Installation notesA load cell is only correct when the assembly around it is correct.
The safest way to quote or replace a load cell is to verify the installed geometry and the electrical interface together. Capacity alone is not enough.
- Match mounting holes, load point, thread, and installed height
- Confirm cell count and junction-box wiring
- Confirm material and protection rating for the environment
- Confirm rated output, excitation, and input/output impedance
- Keep datasheets, photos, and old part numbers with the service record
05 / 06Technical dataCatalog attributes for this load cell.
Material Nickel-plated alloy steel Protection IP67 Signal Analog Cable length 20.3 ft / 6.2 m Manufacturer Vishay-Revere Manufacturer part number 05203-025E-3S-01F Rated capacity 25K lb Capacity in pounds 25,000 lb Sealing Covered and Potted Thread Through Hole Rated output 3.0 mV/V Recommended excitation 10 V Maximum excitation 15 V Input impedance 700 ± 14 Ω Output impedance 697 ± 4 Ω Insulation resistance ≥ 1000 MΩ Combined error ≤ ±0.03 %FSO Creep error ≤ ±0.03 % / 20 min Safe overload 150 %Emax Ultimate overload 300 %Emax Operating temperature −18 to +65 °C Output sensitivity 3.0 mV/V Zero balance ± 1.0 %FSO Compensated temperature −10 to +40 °C Safe side load 100 %Emax 06 / 06Part number referenceOrder code and fit FAQ.
Product Order code Revere 5203-25Klb 05203-025E-3S-01F Double-Ended Beam Load Cell 12306 Is the SKU enough to confirm replacement?
No. Use the SKU as the order code, then confirm model, capacity, dimensions, wiring, signal, and environment.
What if some catalog attributes are blank?
Treat blank attributes as items to confirm before ordering. The description only uses available catalog data and conservative application guidance.
Can WeightechUSA help identify a match?
Yes. Send photos of the installed cell, the label, mounting dimensions, cable colors, capacity, and the scale application.
DIMENSIONSOutline dimensions.
Source: manufacturer datasheet Talk to a WeightechUSA load-cell specialist.
Send the old load-cell label, capacity, dimensions, cable details, and application. We will confirm whether 12306 is the right fit.
Email SalesView DatasheetCall +1 (954) 666-0877 × 305 Signal Analog Protection class IP67 Material Nickel-Plated Alloy Steel Combined error ≤ ±0.03 %FSO Compensated temp range −10 to +40 °C Creep error 20mins ≤ ±0.03 % / 20 min Input impedance 700 ± 14 Ω Insulation resistance ≥ 1000 MΩ Internal Battery -- Maximum excitation 15 V Maximum safe overload 150 %Emax Operating temp range −18 to +65 °C Output impedance 697 ± 4 Ω Rated capacity 25K lb Rated output 3.0 mV/V Recommended excitation 10 V Safe sideload 100 %Emax Ultimate central overload 300 %Emax Zero balance ± 1.0 %FSO Manufacturer Vishay-Revere Cable length 20.3 ft / 6.2 m Thread - Clevis Through Hole Sealing Covered and Potted Interchangeable Zemic H9D Manufacturer's Part Number 05203-025E-3S-01F Short name 5203-25Klb Double-Ended Beam Hero chips IP67; Nickel-Plated Alloy Steel; Analog signal; 20.3 ft / 6.2 m cable
