The Zemic B6N is low profile single-point load cells designed for direct mounting on machines and scale platforms. Their small physical size, combined with high accuracy and stainless steel construction makes these load cells ideally suited for harsh environment application of machines and bench scales.
The special humidity-resistant protective coating assures long-term stability over the entire compensated temperature range.The two additional sense wires feed back the voltage reaching the Single-Point load load cell B6N. Complete compensation of changes in lead resistance due to temperature change and/or cable extension is achieved by feeding this voltage into the appropriate electronics.
Approval | ATEX, FM, OIML |
---|---|
Signal | Analog |
Protection class | IP67 |
Material | Stainless Steel |
Internal Battery | -- |
Maximum excitation | 18 V |
Maximum safe overload | 150 % of FS |
Operating temp range | -35 ~ +65 °C |
Recommended excitation | 5 ~ 12 V |
Recommended torque | M6: 10 Nm |
Sensitivity | 2.0 ± 0.2 mV/V |
Storage temp range | -40 ~ +70 °C |
Weight of equipment | 1.1kg ~ 2.3lb |
Manufacturer | Zemic |
Cable type | Shielded, 6 conductor cable , conductor AWG 24 |
Accuracy | OIML R60 C3 |