The Zemic H3G H3G-C3-2.5T-6B S-Type Tension/Compression Load Cell is an S-type tension/compression load cell rated 2.5 t (2,500 kg). Use it as a replacement or new-build component only after confirming capacity, dimensions, material, seal rating, electrical signal, and wiring against the scale assembly. The catalog identifies the manufacturer as Zemic and the model / part number as H3G-C3-2.5t-6B.
S-type cells are used for suspended, tension, and inline force applications where the force path must stay centered.
S-type geometry fits suspended weighing with clevises, rod ends, or tension hardware.
Useful where the system measures pull, compression, or bidirectional force.
Match thread, capacity, material, and wiring before swapping an existing S-beam.
Confirm 2.5 t (2,500 kg) against dead load, live load, impact, and load distribution.
Check mounting pattern, installed height, load point, cable exit, and platform or vessel geometry before ordering.
Catalog protection is Sealed by adhesive; oil-proof, waterproof. Verify washdown, outdoor, corrosive, or hazardous exposure before replacement.
Catalog signal is Analog. Confirm excitation, mV/V output, impedance, wiring color code, and indicator/transmitter input.
The safest way to quote or replace a load cell is to verify the installed geometry and the electrical interface together. Capacity alone is not enough.
| Material | Alloy steel |
| Protection | Sealed by adhesive; oil-proof, waterproof |
| Signal | Analog |
| Cable length | 6 m (20 ft) |
| Cable type | Shielded 4-conductor, Ø5 mm |
| Manufacturer | Zemic |
| Manufacturer part number | H3G-C3-2.5t-6B |
| Rated capacity | 2.5 t (2,500 kg) |
| Capacity | 2500 kg |
| Capacity weight | 2500 kg |
| Approval | None · NTEP 06-099A2 |
| Dimensions | 76.2 x 101.6 mm |
| Rated output | 3.0 ± 0.008 mV/V |
| Rated output tolerance | ± 0.008 mV/V |
| Recommended excitation | 5 ~ 12 VDC |
| Maximum excitation | 18 VDC |
| Input impedance | 430 ± 60 Ω |
| Output impedance | 351 ± 2.0 Ω |
| Insulation resistance | ≥ 5000 MΩ @ 50 VDC |
| Combined error | ≤ ±0.020 %FS (C3) |
| Creep error | ≤ ±0.016 %FS / 30 min (C3) |
| Safe overload | 150 %FS |
| Ultimate overload | 300 %FS |
| Operating temperature | −35 to +70 °C |
| Number of wires | 4 |
| Compensated temperature | −10 to +40 °C |
| Product | Order code |
|---|---|
| Zemic H3G H3G-C3-2.5T-6B S-Type Tension/Compression Load Cell | 12189 |
No. Use the SKU as the order code, then confirm model, capacity, dimensions, wiring, signal, and environment.
Treat blank attributes as items to confirm before ordering. The description only uses available catalog data and conservative application guidance.
Yes. Send photos of the installed cell, the label, mounting dimensions, cable colors, capacity, and the scale application.
Send the old load-cell label, capacity, dimensions, cable details, and application. We will confirm whether 12189 is the right fit.
Email SalesView DatasheetCall +1 (954) 666-0877 × 305
| Signal | Analog |
|---|---|
| Protection class | Waterproof |
| Material | Alloy Steel |
| Combined error | ≤ ±0.020 %FS (C3) |
| Compensated temp range | −10 to +40 °C |
| Creep error 20mins | ≤ ±0.016 %FS / 30 min (C3) |
| Input impedance | 430 ± 60 Ω |
| Insulation resistance | ≥ 5000 MΩ @ 50 VDC |
| Internal Battery | -- |
| Excitation voltage | 5 ~ 12 V (Max 18 V) |
| Maximum excitation | 18 VDC |
| Maximum number of intervals | 3000 |
| Maximum safe overload | 150 %FS |
| Minimum dead load | 0% Emax |
| NTEP/OIML | No OIML approval (TC7866 covers 50-250 kg only) · NTEP 06-099A2 |
| Operating temp range | −35 to +70 °C |
| Output impedance | 351 ± 2.0 Ω |
| Rated capacity | 2.5 t (2,500 kg) |
| Rated output | 3.0 ± 0.008 mV/V |
| Rated output tolerance | ± 0.008 mV/V |
| Recommended excitation | 5 ~ 12 VDC |
| Recommended torque | 450 Nm |
| Sensitivity | 3.0 ± 0.008 mV/V |
| Storage temp range | -40 to +70 °C |
| Ultimate central overload | 300 %FS |
| Weight of equipment | 0.05t-1.0t: ~0.7kg | 2.5t: 1.0kg | 5.0t: 1.5kg | 7.5t+: 3.0kg |
| Y=Emax/Vmin | 10000 |
| Zero balance | < ± 1.0 %FS |
| Manufacturer | Zemic |
| Capacity | 2500 kg |
| Cable type | Shielded 4-conductor, Ø5 mm |
| Cable length | 6 m (20 ft) |
| Interchangeable | Sensortronics 60001, Revere M363 |
| Number of Wires | 4 wires |
| Unit | KG |
| Manufacturer's Part Number | H3G-C3-2.5t-6B |
| Approval | NTEP |
| Short name | H3G S-Type Load Cell · KG / 2500 kg · H3G-C3-2.5t-6B |
| Hero chips | 2,500 kg; Waterproof; Alloy Steel; Analog signal; NTEP |