
The Berman BRP-Plus is a rocker column compression load cell family. This page describes the family; use the table below to select the SKU your application requires.
Values that differ per SKU are listed in the table below and on each SKU's own page.
| Material | Stainless steel |
| Protection | IP68 (EN 60529) |
| Signal | Analog |
| Input impedance | 700 ± 20 Ω |
| Output impedance | 703 ± 5 Ω |
| Insulation resistance | ≥ 5000 MΩ |
| Zero balance | ± 1 %FS |
| Compensated temperature | −10 to +40 °C |
| Operating temperature | −30 to +70 °C |
| Recommended excitation | 10 ~ 12 VDC |
| Maximum excitation | 15 VDC |
| Total error | ± 0.02 %FS |
| Creep (30 min) | ± 0.02 %FS |
| Non-repeatability | ± 0.015 %FS |
| Temperature effect on zero | ± 0.02 %FS / 10 °C |
| Temperature effect on span | ± 0.02 %FS / 10 °C |
| Safe overload | 150 %FS |
| Lateral load limit | 300 %FS |
| Cable | 20 m, Ø6 mm, 4 wires |
| Rated output | 2.0 ± 0.005 mV/V |
| Capacity | Manufacturer part number | SKU | Approval | Price |
|---|---|---|---|---|
| 40 t | BRP-PLUS/40T | 13530 | — | $286.00 |
| 50 t | BRP-PLUS/50T | 13531 | — | $371.00 |

Send the model and application. We will confirm which BRP-Plus SKU fits.
Email SalesView DatasheetCall +1 (954) 666-0877 × 305| Signal | Analog |
|---|---|
| Protection class | IP68 |
| Material | Stainless Steel |
| Combined error | ± 0,02 |
| Creep error 30 mins | ± 0,02 |
| Input impedance | 700 ± 20 |
| Internal Battery | -- |
| Operating temp range | -30 — +70 °C |
| Output impedance | 703 ± 5 |
| Sensitivity | 2,0 ± 0,005 mV/V |
| Manufacturer | Berman Weighing Technology |
| Cable length | 20 m | 4 wires | Diameter: 6mm |
| Accuracy | C3 |
| Short name | BRP-Plus Load Cell |
| Hero chips | IP68; Stainless Steel; Analog signal; 2,0 ± 0,005 mV/V |