
BTBI Shear Beam Load CellBerman BTBI Shear Beam Load Cell
- Description
- Additional Information
- 01 / 04Shear Beam Load Cells
Shear Beam Load Cell family for confirmed-fit replacement and scale builds.
The Berman BTBI Shear Beam Load Cell is a shear beam load cell family manufactured in alloy steel with IP68 ingress protection, spanning 250 kg – 10,000 kg. This page describes the family; use the capacity table below to select and order the specific SKU your application requires.
250 kg – 10,000 kgCapacity rangeAlloy steelMaterialIP68Protection02 / 04Application fitWhere this load cell family belongs.
Shear and bending beam cells are common choices for floor scales, livestock platforms, tanks, hoppers, and low-to-mid capacity industrial scales.
01Platforms and floor scales
A practical load-cell family for fabricated platforms and summing-box systems.
platform02Tanks and hoppers
Works well when mounts control side load and vessel movement.
vessel03Livestock and agriculture
Often used in platform and chute builds when capacity and environmental rating fit.
ag scale03 / 04Technical dataSeries-level catalog attributes (kg line).
Manufacturer Berman Weighing Technology Material Alloy steel Protection IP68 Signal Analog Rated output 2.0 ± 0.002 mV/V Input impedance 400 ± 20 Ω Output impedance 352 ± 3 Ω Insulation resistance ≥ 5000 MΩ Maximum excitation 15 VDC Compensated temperature −10 to +40 °C Operating temperature −30 to +70 °C Safe overload 150 %FS Ultimate overload 250 %FS Cable type 4 wires; 5m length; Ø5mm DIMENSIONSOutline dimensions.

Source: manufacturer datasheet Talk to a WeightechUSA load-cell specialist.
Send the old load-cell label, capacity, dimensions, cable details, and application. We will confirm which BTBI capacity SKU is the right fit.
Email SalesView DatasheetCall +1 (954) 666-0877 × 305 Signal Analog Protection class IP68 Material Alloy Steel Combined error ≤ ±0.05 %FS Compensated temp range −10 to +40 °C Creep error 30 mins ± 0.05 for 2t | ± 0.02 for 5t | ± 0.03 for 10t Input impedance 400 ± 20 Ω Insulation resistance ≥ 5000 MΩ Internal Battery -- Maximum excitation 15 VDC Maximum safe overload 150 %FS Nominal temp range -30°C ~ +70°C Operating temp range −30 to +70 °C Output impedance 352 ± 3 Ω Rated output 2.0 ± 0.002 mV/V Recommended excitation 10~12 VDC Safe sideload 250 kg to 5t: 150% of Capacity | 10t: 120% of Capacity Sensitivity 2.0 ± 0.002 Ultimate central overload 250 %FS Zero balance ± 1 %FS Manufacturer Berman Weighing Technology Cable type 4 wires; 5m length; Ø5mm Class C3 Number of Wires 4 wires Short name BTBI Shear Beam Load Cell Hero chips IP68; Alloy Steel; Analog signal; 2.0 ± 0.002; 4 wires